Worsted Spinning & Worsted Speed Frame Spares

Product Details:

NSC GILL BOX GN-6

Sl.No.    Part No.       Description1)          411 A 084  WASHER 20 OD2)          422 A 30 A. NEEDLE CAGE.K20X226X17
3)          425 A 202 F. NUT.4)          425 A 208 B. WASHER MB-55)          426 A 004 H. PORUS RING. [20X28X16]6)          426 A 021 C. PORUS RING: [20X28X20]7)          426 A 021 L.  CROSS REEL [PORUS RING]       
8)          426 A 044 B.  CROSS REEL [PORUS RING] 
9)          426 A 077 Y.  PORUS RING. DIA. 6X12X10
10)        432 A 068 D.  CONNECTING LINK.

N9SC GILL BOX FM-7

NSC COMBER PB-30

WOOLEN WORSTED SPINNING SPARES

Additional Information:

• Delivery Time: Depends on quantity

Product Details:

Loose boss rollers / Top rollers / Apron Top rollers ensure consistent output quality, reliable performance and long service life. Characterized by sturdy construction and outstanding features.

Features

• Sturdy double row ball bearing 
• Through hardening of axle and outer shells
• Effective U-type seal
• Lubricated with special grease TRG 5

Benefits

• Higher load bearing capacity
• No ingress of foreign particles
• Long re-lubrication intervals reduce maintenance
• Smooth running 
• Consistent quality output

Applications
Cotton, man-made Fibres,Wool and Blends.

Worsted Ring Frames
LP 314 / LP 316

Additional Information:

• Delivery Time: DEPENDS ON QUANTITY
• Packaging Details: CARTON BOX / WOODEN BOX

Product Details:

Conical Rings
Considering the need for up-gradation and improvement in wear and tear properties for better life and performance, we have now launched an advanced version of our normal conical and vertical rings.
These rings are made from special type of alloy steel and have the following features :
Fine grain micro structure matrix for even and uniform friction properties.
Special CAM process to improve the ring profile. The process ensures precise control on the profile of the rings.
Special Heat treatment process to give absolutely uniform micro-structure.
After hardening, the rings are subjected to a high technology process to enhance the wear resistance and for smooth gliding movement of the traveller.
This helps in generating consistent quality of yarn, which is very important in high value wool fibre production.
The state of art manufacturing process ensures controlled Ovality to give better working parameters.
The conical rings are manufactured in all sizes and of all heights - 9.1 mm, 11.1 mm, 17.4 mm.
Vertical rings range from 6.4 mm to 50.8 mm height.
Diameter is no constraint.

Additional Information:

• Delivery Time: DEPENDS ON QUANTITY
• Packaging Details: WOODEN BOXES

Product Details:

Weighting arm (commonly known as "top arm") drafting systems are well established and accepted by textile mills across the globe. Loading springs used on weighting arms are pre-calibrated for specified loads for an unlimited period of time.

Features 

• Reliable loading through proven helical coil springs
• Choice of load selection on each top roller
• Maintenance free

Benefits

• Consistent quality of yarn
• No height gauge setting required after cot buffing within the range
• Free from vagaries of pneumatic pressure loss or pressure variations on top rollers
• Suitable for a wide variety of fibres and yarn counts
• Virtually maintenance free

Applications
Drafting system suitable for speed frames and ring frames of any make for cotton, man-made fibres, wool and blends.

Worsted Spinning frames
PK1601-01 for wool/worsted

Fibre length   Product   Available gauges(mm)
Worsted Ring Frame 
    PK 1601   75/82.5

Additional Information:

• Delivery Time: DEPENDS ON QUANTITY
• Packaging Details: CARTON BOX / WOODEN BOX

Product Details:

Our ring travellers are specially surface treated by diffusion technique to impart excellent gliding properties which favour the passage of the yarn, avoid the accumulation of fibre fly, to withstand extreme wear and better heat dissipation for longer life.

NORMAL TYPE FOR NORMAL PROFILE RINGS
LI FLAT - 1/0 to 20/0, 22/0, 24/0 and 
No 1 to 10
L1 UDR -    1/0 to 20/0, 22/0, 24/0 and 
No 1 to 10
L1 HO - 1/0 to 20/0, 22/0, 24/0 and 
No 1 to 10
M1 FLAT - 1/0 to 20/0 No 1 to 10
M1 UDR    - 1/0 to 20/0 No 1 to 10
M1 HO - 1/0 to 10/0 No 1 to 10
P1 HWO - 1/0 to 10/0 No 1 to 10
M2 FLAT - 1/0 to 20/0 No 1 to 10
M2 UDR - 1/0 to 20/0 No 1 to 10
M2 HO - 1/0 to 20/0 No 1 to 10
P2 HWO - 1/0 to   8/0 No 1 to 10
H2 HO   - 1/0 to 10/0 No 1 to 10

ELLIPTICAL TYPE FOR ANTIWEDGE AND CR RINGS
ELI FLAT - 1/0 to 20/0, 22/0, 24/0 and    No 1 to 10
EL1 UDR - 1/0 to 20/0, 22/0, 24/0 and     No 1 to 10
EM1 FLAT - 1/0 to 20/0 No 1 to 10
EM1 UDR - 1/0 to 20/0 No 1 to 10
EM1 HO - 1/0 to 20/0 No 1 to 10
EP1 HWO - 1/0 to 10/0 No 1 to 10
EM2 FLAT - 1/0 to 16/0 No 1 to 10
EM2 UDR - 1/0 to 12/0 No 1 to 10
EM2 HO  - 1/0 to 12/0 No 1 to 10
EL2 FLAT - 1/0 to 20/0 No 1 to 10
EL2 UDR - 1/0 to 20/0 No 1 to 10
EP2 HWO - 1/0 to   5/0 No 1 to 10

UNIVERSAL TYPE FOR NORMAL PROFILE, ANTIWEDGE AND CR ONE FLANGE RINGS
UI UL UDR - 1/0 to 20/0, 22/0, 24/0
U1 UM UDR-  1/0 to 20/0, 22/0, 24/0

Additional Information:

• Delivery Time: DEPENDS ON QUANTITY
• Packaging Details: PLASTIC BOXES

Product Details:

Our ring travellers are specially surface treated by diffusion technique to impart excellent gliding properties which favour the passage of the yarn, avoid the accumulation of fibre fly, to withstand extreme wear and better heat dissipation for longer life.

NORMAL TYPE FOR NORMAL PROFILE RINGS
LI FLAT  - 1/0 to 20/0, 22/0, 24/0 and 
No 1 to 10
L1 UDR -    1/0 to 20/0, 22/0, 24/0 and 
No 1 to 10
L1 HO  - 1/0 to 20/0, 22/0, 24/0 and 
No 1 to 10
M1 FLAT  - 1/0 to 20/0 No 1 to 10
M1 UDR     - 1/0 to 20/0 No 1 to 10
M1 HO  - 1/0 to 10/0 No 1 to 10
P1 HWO  - 1/0 to 10/0 No 1 to 10
M2 FLAT  - 1/0 to 20/0 No 1 to 10
M2 UDR  - 1/0 to 20/0 No 1 to 10
M2 HO  - 1/0 to 20/0 No 1 to 10
P2 HWO  - 1/0 to   8/0 No 1 to 10
H2 HO    - 1/0 to 10/0 No 1 to 10

ELLIPTICAL TYPE FOR ANTIWEDGE AND CR RINGS
ELI FLAT  - 1/0 to 20/0, 22/0, 24/0 and     No 1 to 10
EL1 UDR  - 1/0 to 20/0, 22/0, 24/0 and      No 1 to 10
EM1 FLAT  - 1/0 to 20/0 No 1 to 10
EM1 UDR  - 1/0 to 20/0 No 1 to 10
EM1 HO  - 1/0 to 20/0 No 1 to 10
EP1 HWO - 1/0 to 10/0 No 1 to 10
EM2 FLAT - 1/0 to 16/0 No 1 to 10
EM2 UDR  - 1/0 to 12/0 No 1 to 10
EM2 HO   - 1/0 to 12/0 No 1 to 10
EL2 FLAT  - 1/0 to 20/0 No 1 to 10
EL2 UDR  - 1/0 to 20/0 No 1 to 10
EP2 HWO  - 1/0 to   5/0 No 1 to 10

UNIVERSAL TYPE FOR NORMAL PROFILE, ANTIWEDGE AND CR ONE FLANGE RINGS
UI UL UDR - 1/0 to 20/0, 22/0, 24/0
U1 UM UDR-   1/0 to 20/0, 22/0, 24/0

Additional Information:

• Delivery Time: DEPENDS ON QUANTITY
• Packaging Details: PLASTIC BOXES

Product Details:

Our high performance spindles with HZ spindle inserts are well proven in design and widely accepted by spinning mills and machinery manufacturers. Millions of spindles are in operation across the globe.

Features 

• High spindle speed up to 10000 rpm.
• Compact neck bearing.
• Spring support for axial load.
• Well proven conical foot step design.
• Flexible centering sleeve.

Benefits

• Permits higher spindle speed due to smaller wharve dia.
• Extremely low friction co-efficient
• Ensures lower vibrations
• Self centering ensures concentric running
• Low energy consumption 
• Low noise

Applications
Suitable for ring spinning and doubling frames for cotton, jute, man-made fibres, wool and blends.

Variants
HZ-44, HZ-68, HZ-77 (3000 to 7000 rpm)
(18 mm Neck Bearing)
HZ-44, HZ-68, HZ-77 (up to 10000 rpm)

Additional Information:

• Delivery Time: DEPENDS ON QUANTITY
• Packaging Details: CARTON BOX / WOODEN BOX

Product Details:

Ours highly experienced firm best known for quality Bobbin Holders. We have gained specialization in manufacturing and supplying of rotating and non rotating type bobbin holders suitable for all brands of spinning machines such as Rieter, Lakshmi Rieter, Zinser, Suessen, Toyoda, Howa, Marzoli, Chineese, Textool, Jeetstex, Texmaco, and Russian. The offered holders are fabricated by utilizing best suited inventory of raw materials. Further, these rigorously tested bobbin holders are accessible at a nominal price.

Features :

• Fully closed and protected against entry of fly and fluff.
• The spherically centered bearing mechanism for a smooth and consistent unwinding of roving. Internal braking system adopts the spherical centering principal for effective braking.
• The ratchet mechanism ensures superior performance and a reliable longer duration of life. All components are of anti-static nature and aesthetically appealing with perfect finish.
• The polymer parts are made from the worlds leading polymer manufacturer material.

Internal Brake System 
The internal brake mechanism adopts spherically centered principle. This brake system allows neither creel over run nor stretch and runs precisely during all stages of bobbin. This ensures a smooth and consistent rotation of bobbin from the beginning to end.

Ratchet Mechanism
The simplified ratchet mechanism provides reliable operation for a longer period of time. Easy to operate in comparison with other mechanisms.It ensures positive doffing and donning of bobbins. The force applied during doffing and donning action does not effect the bearing system.

Spherical bearing system
The bearing system is of a spherically centered design with special grade stainless steel balls, raceways made of specially formulated bearing grade material. This helps in self lubrication, smoother rotation and for a maintenance free operation. The durability of the bearing has been improved considerably.

Rocking system
The spherically centered system helps the hanger to perform smoothly with a constant brake force in any row on creel at all positions.

Bobbin Holders for Auto Transportation System
The future oriented, Automatic Bobbin Transport System is adaptable to any make of spinning machines and in flexible layouts. This system takes care of transportation of the roving bobbins from the speed frame to ring spinning frame. Newly developed special version Auto Creel Bobbin holders are designed specially to meet the precise mechanical and electronically controlled automation requirements.

Additional Information:

• Delivery Time: DEPENDS ON QUANTITY
• Packaging Details: CARTON BOX

Product Details:

AC FLYERS

We commenced manufacturing of aluminium alloy flyers since a decade ago, since then the company has indigenously built on this renowned technology and has been constantly innovating to the changing requirements of new generation speed frames. We one among the manufacturers of high performance aluminium flyers have sold more flyers to the textile industries across the world. Our manufacturing technology include following areas;  1.Process technology 2.Design capability 3.Material know-how 4.Process know-how 5.Dynamic balancing 6.Gravity die casting & pressure die casting 7.Tool making for gravity die casting, pressure die casting, sheet metal forming.

Top Driven (Suspended) AC Flyers

The top driven (suspended) flyer is a further addition to the range of new generation flyers. These flyers incorporate all the advantages of the closed type AC flyers and also offer additional advantages

Advantages

Speeds upto 1600 rpm possible

Suspended design permits larger package size

A steel presser provides uniform pressure throughout the bobbin built-up. This results in compact bobbin with uniform winding

A steel presser with electroless nickel plating and / or hardened offers better wear resistance

The extended height back row flyers can be supplied for all the popular models of the speed frame. The extended height flyer will help to maintain uniform entry angle and uniform tension between front and back row bobbins. This will be help in achieving uniform yarn quality for all bobbins built within a machine.

AC Flyers

The close type AC flyer is specially designed to keep pace with the changing technologies and customer needs.

Advantages

Speeds upto 1400 rpm possible

Slotless construction leading to better quality, as the roving is not exposed to air turbulence as in the SYC type flyers

Excellent surface finish of the passage offers minimal resistance in roving, resulting in higher productivity

A steel presser maintains a uniform pressure throughout the bobbin built-up and hence gives uniform winding & compact bobbin

Sizes to suit all reputed makes and models of speed frames

 

SYC Flyers

SYC flyers are designed to replace the old age steel flyers. Made from lightweight aluminium alloy, the SYC flyer has been well accepted by the industry. SYC flyers are superior in performance compared to the steel flyers. Although outdated technology, we continue to make SYC flyers for those customers who need them for specific application.

Pressers

The presser helps in compact and uniform winding of the bobbin. The presser is made from aluminium or steel, depending upon the type of the flyer. We supply a wide variety of pressers for different types of flyers such as SYC, AC and AC suspended. For special applications like worsted and acrylic spinning, we offer pressers with wear resistant treatment to enhance the life of the presser.

False Twisters

False Twisters impart a false twist to the roving, thus strengthening it as well as helping to avoid the liberation of loose fibres in the flyer. Secondly, the false twister serves as a guide to the roving as it enters the hollow arm. We supply a range of false twisters moulded from rubber, polyurethane or PVC depending on the application. These twisters are designed for various makes of speed frames and are compatible with all popular make of flyers.

Additional Information:

• Packaging Details: CARTON BOXES